Secondary aquifer

High Speed Rail (Crewe – Manchester) Environmental Statement, Glossary, abbreviations and references, published by the Department for Transport in 2022, states: ‘There are two types of Secondary aquifer designation. ‘Secondary A’ are permeable layers capable of supporting water supplies at a local rather than strategic scale, and in some cases forming an important source of base flow to rivers. These are generally aquifers formerly classified as minor aquifers. ‘Secondary B’ are predominantly lower permeability layers which may store and yield limited amounts of groundwater due to localised features such as fissures, thin permeable horizons and weathering. These are generally the water-bearing parts of the former non-aquifers. ‘Secondary (Undifferentiated)’ are assigned in cases where it has not been possible to attribute either category A or B to a rock type. In most cases, this means that the layer in question has previously been designated as both minor and non-aquifer in different locations due to the variable characteristics of the rock type.’

[edit] Related articles on Designing Buildings

• High Speed 2 (HS2).
• Aquifer.
• Aquitard.
• Artesian.
• Chalk aquifer.
• Drainage.
• Flood and water management act.
• Groundwater.
• Groundwater control in urban areas.
• Principal aquifer.
• Water engineering.
• Watercourse.
• Water management.
• Water table.

Comments

[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.